Instructions:  How to Schedule An Inspection

Instructions:  How to Schedule An Inspection

  1. Select “Locate Building Job”
  2. Type in permit number into Job ID box
  3. Select Continue
  4. Under Job Information select the permit you would like to schedule an inspection for
  5. Examples: 
    • New Residential Building may include the following inspections- build monolithic slab, lintel inspection, build rough framing, sheathing, insulation, lath for stucco, final build inspection
    • Electric permit may include the following- rough electric, final electric
    • Plumbing permit may include the following – plumbing under slab, sewer connection, plumbing rough, plumbing final
    • Mechanical permit may include the following – mechanical rough, mechanical final
    • Roofing permit may include the following – dry in, roofing final
    • Irrigation permit may include the following – plumbing final
  6. Once you have selected the permit type select Inspection Status (blue tab on the left hand side of the screen)
  7. Under Available Inspections at the bottom of the screen select the bubble next to Associated
  8. The current available inspections will now display. Select schedule inspection next to the desired inspection.
  9. Select the little blue box next to the desired inspection date.
  10. Select 8:00 AM – 4:00 PM and select continue
  11. Leave desired inspection comments for the inspector (point of contact, telephone number, gate code, etc.). If none, leave blank.
  12. Select schedule.

To schedule additional inspections for different permit type select Job Status (blue tab on the left hand side of the screen) and complete scheduling process again.